|
|
|
|
|
|
|
|
|
|
|
Industrial &
Marine Home | Industrial Painting Contractors | News | Sherwin-Williams Offers Fast Clad® FD Epoxy Coating
Offers Fast Dry, Fast Recoat for Shop Applications |
|
|
|
|
|
|
|
|
|
Sherwin-Williams Offers Fast Dry, Fast Recoat Polyamide Epoxy for Shop Applications
Fast Clad® FD Epoxy Shortens Dry-to-Handle Times and Increases Productivity
(CLEVELAND – July 10, 2003) New from Sherwin-Williams Industrial and Marine Coatings group is Fast Clad® Fast Dry (FD) Epoxy, a two-component, fast-dry, high-build polyamide epoxy formulated for quick recoat. Fast Clad FD Epoxy can be applied at 4 to 6 mils dry-film thickness at temperatures as low as 40º F. The coating is recommended for use in fabrication shops or where quick, dry-to-handle times are required such as refineries and water treatment plants. Fast Clad FD Epoxy can be recoated in three hours at 77º F for increased productivity in shop applications, including lower labor and energy costs, lower utility usage and, ultimately, faster throughput.
Available in a semi-gloss finish, the low-VOC coating is chemical and abrasion resistant and can be applied to marginally prepared surfaces. Fast Clad FD Epoxy can be used on multiple substrates such as steel, galvanized metal, aluminum, concrete/masonry and concrete block, and is suitable for use in USDA-inspected facilities.
The Sherwin-Williams Chemical Coatings Division, with more than 135 years of experience in products finishing technology, serves the chemical coatings market through a North American network of company-owned locations and with expanding global reach. Sherwin-Williams broad line of low-VOC coatings, full range of technical support and just-in-time distribution capabilities allows finishers to specify quality coatings with the assurance of regulatory compliance. For more information, contact us via e-mail, or to have a representative contact you, call 1-800-524-5979.
|
|
|
|
|
|
|
|
|
